| | Sector | abcRailways Transport Services | Tender Value | N.A. | | Location | Punjab - India | Ref.No | 94016718 | | Closing Date | 13 - Apr - 2026 | | | FERRITIC STEEL SHEET 3X1250X2100MM .
* FERRITIC STEEL SHEET 3X1250X2100MM., as per Drawing RDSO SPEC. NO. C-K201, GR
ADE X2CRNI12 (409M) TABLE 1&2, HEAT TREATMENT CONDITION 2B AS PER TABLE-5., Packing Instruc
tion STAINLESS STEEL SHEETS, COILS AND PLATES- (A) STAINLESS STEEL (AUSTENITIC & FERRITIC ST
EEL) COILS. THE COIL SHALL BE PROTECTED IN REASONABLY GOOD CONDITION TO WITHSTAND NOR
MAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PROVISION AS THE BAREST MINIMU
M I) COIL SHOULD BE WRAPPED WITH A LAYER OF WATER PROOF PAPER THROUGH OUT WHOLE LENG
TH. II) COIL SHOULD BE WRAPPED WITH A LAYER OF BIODEGRADEABLE SHEET. III) OUTER & INNER OF
COIL SHOULD BE WRAPPED WITH GI SHEET. IV) SIDE OF THE COIL SHOULD BE COVERED WITH CARD B
OARD SHEET. V) AFTER THIS WHOLE COIL SHOULD BE WRAPPED WITH BIODEGRADEABLE PLASTIC SH
EET OF SUITABLE THICKNESS. VI) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING F
OLLOWED BY ANOTHER IRON RING. VII) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RIN
G. VIII) COIL SHOULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF
THE COIL AND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. IX) WHOLE COIL SHOUL
D BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTING/STACKING. X) THE SHEETS IN COIL FORM FO
R THICKNESS 2MM AND ABOVE SHALL HAVE INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 100
0-1300MM WEIGHT OF COIL 2.4 - 10 TONNES XI) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2
MM SHALL HAVE INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL
5.0 - 10 TONNES. (B) STAINLESS STEEL (AUSTENITIC & FERRITIC STEEL PLATES/SHEETS) I) THE SHEET
S/PLATES SHALL BE SUPPLIED IN BUNDLES OF OPTIMUM WEIGHT 2MT+/-10% & EACH SHEET/PLATE S
HALL BE SEPRATED WITH A LAYER OF WATER PROOF PAPER, AFTER THIS THE WHOLE BUNDLE SHOUL
D BE WRAPPED WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHE
ET OF SUITABLE THICKNESS. A METAL PROTECTION IN EDGES SHOULD ALSO BE PROVIDED. II) ALL BU
NDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR
EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING
UNDER NEATH) TO FACILITATE HANDLING. MECHANICAL DAMANGE & CORROSION DURING TRANSIT IF
ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty Period 30 Months after the date of delivery ]
[Quantity Tolerance (+/-) 5 %age , Item Category Normal , Total PO value variation Permitt
ed Max 8 lacs ] ] |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|